Clean nail surfaces with detergent free, Isopropyl Alcohol
(!)
Cut patches of linen or fine cotton to match the nail sizes
Smear the surface of the nails with the adhesive provided
Position the fabric patches onto the adhesive and press, forcing the glue into the fabric.
Allow to cure for one hour
Paint with 3 coats of any regular varnish allowing coats to dry
The varnish can be removed using an regular acetone based remover
CAUTION:
(!)
Observe makers safety instructions
They can then be repainted with alternative varnishes as desired
The complete nails can be removed by peeling carefully.
Loctite
TM
424 can be used but the nails will be more brittle and may cause damage. The warranty will be invalidated.
(!)
[
Home
] [
USA Skinergy Sales
] [
UK Skinergy Sales
] [
Skinergy Fitting Guide
] [
Contents
] [
Preparing Prosthesis
] [
Shaping Prosthesis
] [
Fitting
] [
Bench
] [
Vaccum Dolly
] [
Vacuum Station
] [
Fitting
] [
Fitting
] [
Fitting
] [
Fitting
] [
Glues
] [
User Forbidden
] [
Access Holes
] [Nail Varnish] [
Updates
] [
Q&A
]
Copyright©RSLSteeper. Website Hosted by:
Netsite Ltd